Metal sheet Glazed Roll Forming Machine
1.Product components and brief description
Glazed tile press is divided into three parts, roller molding part, compression part, cutting part.The roll forming part of glazed tile press is driven by the motor, the chain drive roll rotation.The pressing part of the tile press is the hydraulic cylinder moving the mould up and down.
2.The glazed tile forming machine line includes the parts as below
| Manual Un-coiler | ◊ Max Capacity: 5000kgs ◊ Inner diameter of coil: 400-600mm ◊ Manual with brake |
| Leveling Device | ◊ Ensure the material level and straight
◊ The width can be adjusted |
Main Forming System
| ◊ Width & Height & Thickness of sheet: According to Drawings
◊ Material: GI sheet coil or Colored sheet coil
◊ Motor Power: 5.5 kw forming system
◊ Roller material:Cr12
◊ Surface of Roller: Heat treatment HRC58-60
◊ Measuring accuracy: +/- 0.5 mm/M
◊ Safety Hood: Cage ◊Arch middle plate: 30mm thickness ◊Output: 8-10 Tons per shift (8 hrs.) ◊The machine base is assembled and welded by high quality steel |
| Hydraulic Cutting Device | ◊ Cutting way: Tracking (Flying).
◊ Oil pump station 1set.
◊ Motor power of Oil pump station: 7.5kw with cooling system
◊ Forced air cooling device available ◊Material of blade: CR12 with heat treatment HRC60-62 |
| Electrical System | ◊ Control system: HMI & PLC control panel.
◊ Power: 440V 50Hz (as per local requirement) |
| Run-out Table | ◊ Frame: 8# steel groove welded
◊ Roller type.
◊ Quantity: 1 pc |
3.Picture about Glazed Roll Forming Machine
