Roof Use Galvenized Coat Metal Soffit Rib R Panel Sheet Rolling Making Machine
1, The Chart of Process Flow:
Manual uncoiler - roll forming machine - computer control system - hydraulic control system - cutting system - output table
2, Components and Technical Specification
1). Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity: 5T
Inner diameter: 500-508mm
2). Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3). Hydraulic System
Power: 4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
4). Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
PLC: Tai Wan Delta
5). Cutting System:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6).Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
3, Package:
Main machine is nude,the computer control box is packed by carton box.All machines needs one 40 feet container to hold.
4, Equipment Show:
